the removed parts need to be installed home again, thoroughly cleaned and maintained 4 after completion. pay special attention to the intermediate position and tightening of each component. after the installation is completed, the power supply connection and test machine must be connected to ensure the normal task of the fume purifier. at the same time, the oil fume purifier must be inspected and maintained from time to time to avoid the accumulation of oil stains and foreign matter, causing failure and damage to the external appliance.

you can choose the most suitable gathering place by disassembly and assemble

small fume purifier is a common electrical appliance in modern home kitchens.

you can choose the most suitable gathering place by disassembly and assemble

things to note before disassembly

in case of sudden damage to electrical appliances or physical safety accidents. at the same time, the power supply needs to be powered off before disassembly and assembled. we must fully understand the external overall structure of the small fume purifier and talk about the part that we don’t understand. it is strongly recommended to seek active assistance or consultation from other professional and technical personnel.

disassembly and assembly skills

first, you need to remove the fume hood and install the small fume purifier. then take out the oil net. the specific steps are similar to the specific steps of disassembly during a thorough cleaning process. then remove the separator and remove various substances adsorbed from the outside of the fume purifier. during the thorough cleaning process, screws are usually disassembled and manually cleaned, which requires sufficient patience and careful operation.

thorough cleaning and maintenance after disassembly

the removed parts must be thoroughly cleaned and maintained, and after disassembly and assembled 4. replace vulnerable parts from time to time to extend to the service life of small fume purifiers. take measures to thoroughly clean the outside of the electrical appliance, and at least take it off and clean it once a week to prevent a large amount of oil and debris from accumulating, causing improper dredging and blockage or more serious failures.

special attention should be paid to the installation