however, during use, the oil fume purifier is a good helper for problem oil fume pollution. there will also be solutions such or that. difficult to measure current is one of them. it requires careful inspection and failures at every point, 9 and 0, to ensure the normal task of the fume purifier. at the same time, we also pay special attention to its electricity safety and ensure the safety and health of the family in use.

detailed introduction to the background

in modern society,

detailed introduction to the background

what is the task of the fume purifier

the ionized small particles are then collected in an electric field. the oil fume purifier mainly performs the basic principle of high-voltage environmental electric field to ionize the oil fume particles. this will achieve the purpose of purifying the air. when i use it, i need to connect the purifier to the power supply. at this time, i can also detect the current to accurately determine whether the fume purifier is working normally.

the main reasons for the difficulty in measuring current

the circuit board is damaged or may be installed incorrectly, etc. so why do some oil fume purifiers find current difficult to measure? this is actually caused by various factors, which may be poor contact with the purifier.

what is the problem that it is difficult to measure current?

you can also check whether the fume purifier is in good contact, first. you can also try connecting the power cord again, which may cause problems to be exposed to poor solutions. secondly, you can also check whether the circuit board of the fume purifier has been damaged. if it is damaged, you must replace the circuit board in time. in addition, you can also check whether the installation is correct. if the installation is incorrect, you need to install it again. if the above skills are not solved, then you need to find other professional and technical personnel to pass the inspection and repair it.

summarize