The fume purifier needs to be thoroughly cleaned from time to time, and it can be installed after 4.to ensure its long-term normal operation.At the same time, if the oil fume purifier is accidentally found to have a fault, it must be able to pass in time and need to be repaired or replaced to prevent safety hazards.

Beibei oil fume purifier installation instructions

As people's overall living...the overall level continues to improve,

Beibei oil fume purifier installation instructions

Choose the most suitable fume purifier

You need to first choose a suitable fume purifier.The same kitchen area and kitchen exhaust volume require different fume purifiers that can be installed before.Therefore, when choosing to purchase, you should make careful choices.In addition, Beibei has a high humidity, so you can also choose some fume purifiers with unique dehumidification functions.

Get ready to install the tool

You need to prepare some basic tools to use.First, basic tools such as hammers, screwdrivers and wrenches can be installed before they are installed.At the same time, electric drills and electric drivers are also required.In addition, you also need to choose to buy some installation screws, sealant and other materials.

You can install the middle position to choose from

Generally speaking, it is best to choose above the kitchen wall, and it is important that the position of the fume purifier can be installed in the middle.This can also prevent smoke from directly rushing into the inside of the fume purifier.At the same time, special attention should be paid to the height of the fume purifier. Generally speaking, the height from the stove is 70 ~90cm between.In addition, the air inlet of the fume purifier that needs special attention must be paid to the outside and the air outlet must be upward to discharge smoke and oil vapor.

Specific steps for operation

You can also follow the following specific steps to install it: prepare the tools and select a good location.

A bracket can be installed.1 and use an electric drill to drill holes in the wall.

2Secure the fume purifier to the bracket.

Sockets can be installed on the wall and powered on.3 Wiring through power supply.

Check and check whether the fume purifier can also be used normally.4 Through debugging.