it can also be easily completed to install the 4 fume purifier. summary: perform the above steps. although the process seems to be very simple, there are still many details that need to be paid attention to, so it cannot be omitted before and after installation. in addition, after installation, i need to thoroughly clean and maintain the oil fume purifier from time to time to ensure the service life and cleanliness of the oil fume purifier.

step 1: purchase of oil fume purifier

before installing the fume purifier,

step 1: purchase of oil fume purifier

step 2: you can install bad situation checks and

it is necessary to check whether the intermediate position of the fume purifier is appropriate. you can install the fume purifier before installing it. first, thorough cleaning of the installation situation needs to be done to ensure that the oil fume purifier that can be installed is in a stable position. secondly, it is necessary to check whether there are tiny cracks or damage in the oil fume pipe. if it is accidentally discovered, it needs to be dealt with first to avoid whether there will be air leakage after installation or if it is safe to solve it.

step 3: disassembly and assemble the pipeline

when the crude oil fume pipeline needs to be disassembled and installed, the oil fume purifier can be installed. in order to lay new pipelines. when disassembling and assembling pipelines, the pipeline materials need to be sorted, such as aluminum pipes and plastic pipes, so as to perform subsequent garbage sorting and disposal methods. you can also directly classify and dispose into the corresponding garbage waste bin.

step 4: connection of the fume purifier

when the newly purchased oil fume purifier is first connected to the pipeline, the oil fume purifier must be connected. to ensure that the oil smoke can also be pumped away unimpededly. if you choose to purchase it at one time, you can directly use the connection order in the order of the book to indicate the connection order. if you have used the fume purifier before, you can also directly use the connection before disassembly and install it, and then install it again in the order of the installation order before.

step 5: debugging and trial operation of the system

the installed fume purifier needs to be systematically debugged and the above connections must be completed. and restart the trial run. during the trial operation, special attention should be paid to carefully observe the task of the fume purifier to ensure that the expected good results can be achieved. at the same time, special attention should be paid to carefully observe the noise and installation reliability so that the solution can be resolved in a timely manner.